PEX002 90° Elbow Manufacturer

Technical Product Specification

Place of Origin: Made in China

Material: ERA Premium polypropylene (PP)

Packing Method: Carton

Color: Red

Dimensions: 1/2”-1”

PEX002 90° Elbow

Manufacturing Standards:

EN ISO 15874

AS/NZS 1429

Approvals and Certifications:

Certified by WRAS

Certified by ACS

Certified by WATERMARK

Method of Jointing:

1. Clean the pipe surface and chamfer the end of pipe.

2. Unscrew nut until half of the thread is visible.

3. Push pipe into body, through the nut, split ring, and O-ring.

4. Screw nut firmly.

Working Pressure: PN16

Working Temperature: 0-45 Degree

PEX002 90° Elbow

Field of Apllication:

Irrigation

Municipal engineering

ERA Quality Control

Tests	Requirement/test standard	Initial type test	Self-monitoring	Third-party control
Hygiene	Growth of microorganisms	Yes	No	At any new formulation
Toxicity test	The extraction of metals	Yes	No	At any new formulation
Opacity test	the amount of light transmitted through the fitting wall shall be less than or equal to 0.2%	Yes	No	At any new design or formulation
Shell Test	For underground uses: assembled fittings and pipes, at 2 times of the rated working pressure for 60 ± 5 sec. No leakageFor above ground uses: assembled fittings and pipes, at 1.5 times of the rated working pressure for 60 ± 5 sec. No leakage	Yes	One per production shift	At any new design or formulation
Torque test	Tighten the fittings with the torque values as manufacture’s installation instruction. No damage.	Yes	One per production shift	At any new design or formulation
Joint Effectiveness	For underground uses: assembled fittings and pipes, at 2 times of the rated working pressure for 1hour ±5min.No leak.For above ground uses: assembled fittings and pipes, at 1.5 times of the rated working pressure for 1hour ±5min.No leak.	Yes	One per production shift	At any new design or formulation
Vacuum test	Assembled the pipes and fittings, give a pressure with Vacuum for 1hour ±5 min，the pressure gauge changes shall not exceed 0.1 bar, and there is no entry of water inside of the fittings.	Yes	One per production shift	At any new design or formulation
Tensile test	Assembled the pipes and fittings, fix them on the stretcher, gradually exert pressure for 15-30s, then keep the force for 5 min ± 30s. The tightening torque and the maximum slipping shall comply with value in specified table.Assembled the pipes and fittings, fix them on the stretcher, gradually exert pressure for 15-30s, then keep the force for 5 min ± 30s. The tightening torque and the maximum slipping shall comply with value in specified table.	Yes	One per production shift	At any new design or formulation
Marking	WRAS，ERAR，PN，Size，Production date	Yes	1x per 4 hour	At any new design or formulation

ERA ADVANTAGES:

50 YEARS QUALITY GAURANTEE

13 INTERNATIONAL CERTIFICATION

STRICT QUALITY CONTROL

GOOD RAW MATERIAL ENSURES EXCEELLENT MECHNICAL AND CHEMICAL PROPERTIES

FAQ

Why choose us?

1. Genuine produces with excellent quality and competitive price.
2. Cooperating with the customers all over the world and knowing the markets very well.
3. ERA is a listed company. Everything can be rest assured working with us.
4. After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

How about the samples?

We could send you the samples, most samples are free to send to most places in China. If sent to other countries, transport fee shoule be paid by you.

What is the location of your company?

Our company is located in the Taizhou Zhejiang Province, China. If you would like to have a visit, you are much welcome.

How should I contact you?

You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.

What is your payment terms?

We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.

What is the shipping port?

We ship the goods via Ningbo or Shanghai port.

What is your delievery time?

The time of delievery is around 30-45days.

What is your MOQ?

Our MOQ is usually 5 CTNS.